NASA to Test Space Repairs

The Space Shuttle Discovery's upcoming mission will include a spacewalk to try out a technique for repairing damaged thermal tiles.

NASA has announced that it will conduct an additional spacewalk on the Space Shuttle Discovery's upcoming mission to test a heat-shield repair technique. The shuttle is scheduled to launch on October 23, 2007.

Heat shield: Damage to Endeavour's thermal tiles located on its underside has prompted NASA to add a fifth spacewalk to Discovery's upcoming mission. The additional spacewalk will test the repair technique that it opted to use for Endeavour. Credit: NASA

Multimedia •  See how the repair method works.

The technique, developed after the 2003 Columbia disaster, requires using a device similar to a caulk gun: astronauts squirt a rubberlike material into any cracks or holes in damaged thermal tiles. The material serves to restore the shuttle's ability to protect itself from the extreme heat encountered during reentry to the earth's atmosphere.

Normally, the tiles are covered with a black, glass surface that rejects heat during reentry. When this outer coating is damaged and the white silica of the tiles is exposed, it leaves them vulnerable to melting. NASA opted against using the repair method on the Space Shuttle Endeavour last month after debris from the external fuel tank came off during launch and struck thermal tiles located on the underside of the shuttle. The strike caused a hole about the size of a baseball in a pair of tiles and stripped off the thermal protective coating of several others. Although NASA decided not to risk an emergency spacewalk to repair the damage, the scare has prompted engineers to include the test as part of Discovery's mission.

How the repair procedure will work in space is still unknown. "Any technology prior to being approved for spaceflight has to undergo rigorous design and testing so that the components can withstand operations in space," says Joe Lavelle, a senior engineer at NASA Ames Research Center. But no one knows exactly how the technology is going to perform until it can be tested in space, he says.

To implement the test repair, astronauts (with tiles in hand) will be attached to the end of the Orbiter Boom Sensor System, a 50-foot-long stick developed specifically for inspecting the hard-to-see areas of the shuttle for possible damage after liftoff. The boom was instrumental in detecting the damage to Endeavour's tiles. It was introduced on the Space Shuttle Discovery's "Return to Flight" mission. (See "NASA's New Cameras.")

Story continues below

Once the astronauts are correctly positioned, they will prepare the damaged areas of the tiles using a brush coated with a sticky gel that removes any loose particles or debris. Next, the astronauts will apply an emittance wash, or "black paint," which is a mix of silicon-carbide particles and a silicon-based rubber commonly used in industrial applications.

The wash applicator is similar to a shoe-polish applicator: it's a cylinder with a foam tip for dabbing on the wash. The wash will serve as a primer for the second material to be applied--the rubberlike goop--but it can be a stand-alone repair technique for minimally damaged tiles.